Chloramine Water Filter: Why London and Thames Water Need a Different Approach
Meta description: Choosing a chloramine water filter for a London or Thames Water home? Learn why chloramine needs the right carbon, enough contact time and a postcode-specific approach.
A chloramine water filter uses catalytic or specially selected carbon to chemically break down chloramine at the media surface. Unlike free chlorine, chloramine needs the right carbon and enough contact time, so a micron rating alone cannot show removal performance.
You fill a glass at the kitchen tap. The water looks clear, but the taste seems flat, or there’s a faint swimming-pool smell. It’s natural to look for a filter. The important question is: what disinfectant is in your supply, and is the filter designed for it?
In London and the Thames Water area, the answer can depend on your supply zone. That matters because a filter that works well on chlorine may not perform the same way on chloramine.
Chloramine vs chlorine: what’s the actual difference?
Both are used to disinfect public water supplies. Chlorine is widely used in the UK. Chloramine is made by combining chlorine with ammonia. That combination is more stable, so it can maintain a disinfectant residual for longer as water travels through the distribution network.
That longer-lasting protection is one reason water companies use it. Thames Water’s reports say supplies may be either chlorinated or chloraminated, and explain that ammonia is added to chlorine in London to form chloramines. The report is for a supply zone, not an individual property, so it’s worth checking your own postcode rather than assuming every London tap is the same. See a Thames Water water quality report.
Chlorine | Chloramine | |
Stability | Less persistent as water moves through the network | More persistent, helping maintain a disinfectant residual |
Why a supplier may use it | Effective disinfection | Longer-lasting residual; can also reduce formation of some disinfection by-products |
What is used to reduce it at the tap | Suitable activated carbon | Catalytic or specially selected carbon designed for chloramine |
Contact time | Often less than chloramine needs | Usually needs more contact time; the right amount depends on the carbon, flow and system design |
Chloramine is harder to remove than free chlorine. Some people also notice a flatter taste. And over time it can be more demanding on copper pipework and rubber seals, depending on the materials and conditions.
That doesn’t mean chloraminated tap water is unsafe to drink. Disinfection is there to protect water as it travels to your home. It simply means the right filter depends on what your supplier uses.
Does a standard carbon filter remove chloramine?
It may reduce some chloramine, but don’t assume a filter designed for chlorine will do the same job on chloramine. Standard granular or block carbon is often selected and rated for free chlorine. Chloramine reacts more slowly with ordinary carbon, so performance depends on the specific media, the amount of carbon and how long the water stays in contact with it.
The key point: chloramine is dissolved in the water. A micron rating describes a filter’s ability to physically capture particles of a certain size. It does not tell you how well the filter chemically breaks down chloramine.
For that, the carbon needs to be suitable for the job. Catalytic or specially selected carbon provides a surface where a chemical reaction can break down chloramine. The media and the time water spends in contact with it both matter.

Stage one pulled from a real install, next to a new one. Cartridge appearance shows a filter has collected material; it cannot, by itself, confirm chloramine reduction.
What does contact time mean for a chloramine water filter?
Empty bed contact time, or EBCT, is a way to describe how long water spends in contact with the carbon bed. In simple terms, a larger bed and a controlled flow rate give the water more time with the media.
That time matters because chloramine reacts more slowly than free chlorine. A small cartridge might be convenient, but if water rushes through it too quickly, the treatment may not match the performance you expect.
When I design a system, I consider the water profile, the media and the flow the property needs. That is why I don’t treat every postcode, tap or whole-house demand as if it were identical. The system has to suit the actual job.
How to remove chloramine from water
Start by finding out what your water company uses at your address. Then look for a filter with a clear chloramine reduction claim, not just a general statement that it “filters chlorine” or has a fine micron rating.
For a chloraminated supply, my approach uses two carbon beds in a lead/lag arrangement. The first, or lead, bed uses high-grade selective carbon to do the main chemical work. The second, or lag, bed provides a further polishing stage and extra contact time.

The first carbon bed handles most of the treatment; the second provides a further polishing stage and contact time.
This two-bed carbon process is now part of stage two in my four-part filtration process:
Stage 1: Kidney care and sediment removal.
Stage 2: Chlorine and multiple by-product removal, including chloramine.
Stage 3: Advanced multi-stage protection, including future contaminants such as PFAS.
Stage 4: Bacteria and microplastic removal, including a 0.01-micron physical barrier.
Some components from one of the manufacturers in our four-part process meet NSF or EU-equivalent ratings 42, 53 and 401. Those component ratings should not be mistaken for a claim that every complete installation has been independently tested as one finished system.

Supplier and certified-media figures shown on our site list chlorine reduction at 100% and chloramine reduction at more than 90%. They are not independent test results for every installation.
How do I know if my water has chloramine?
Check your water company’s website and look up the water quality report for your postcode or supply zone. Thames Water’s reports state that its supply may be either chlorinated or chloraminated. A zone report can help, but it does not give a test result for your individual tap.
If the report is unclear, ask your supplier directly. Taste and smell can be a reason to investigate, but they aren’t a reliable way to identify the disinfectant or measure how much remains.
A useful check during a system assessment is to compare the chlorine or chloramine residual before and after treatment, alongside the flow rate and contact time. That gives a more practical picture than relying on taste alone.
Frequently asked questions
Is chlorine in tap water the same as chloramine?
No. They are related disinfectants, but they behave differently. Carbon chosen for free chlorine may not be suitable for chloramine, so check the filter’s stated performance for the specific disinfectant.
Is chloraminated tap water safe to drink?
Water companies use chloramine as a disinfectant to help protect supplies as water travels through the network. If you have a specialist use for water, such as an aquarium, check the relevant equipment guidance rather than relying on a domestic drinking-water filter.
Does a finer micron rating remove more chloramine?
No. A micron rating describes physical particle filtration. Chloramine is dissolved, so its reduction depends on chemical interaction with appropriate carbon and enough contact time.
Why not use the same filter in every home?
Because the water supply and the household’s flow needs can differ. Homes supplied with chlorine may be suited to a simpler carbon set-up. Chloramine calls for a different media choice and careful attention to contact time. That’s what I mean by postcode perfect: work from the water you actually have, rather than sell the same box to everyone.
I design and fit systems around the property’s water and flow requirements. If you’re in London, Surrey or the Thames Water area, send me your postcode through the contact page and I’ll help you work out what approach makes sense.

Comments