top of page

Allowing water to breathe & restructure

The biomimetic principles of clean, crisp, mountain-fresh drinking water is now available under your kitchen sink

Our unique 7-Part process

Screenshot 2026-11-04 222030.png

"We do for a moment, invite water to breathe
The longectivity of any molecular restructuring of water is un known so we surpass all myths with allowing the water to breathe in that minute moment of restructuring.
With advanced and considered pre treatments that ensure the optimal wholesome nature of drinking water.
Hold up to the light and say cheers to optimal hydration"
​

616118886_1438938121576382_5911083807367459154_n.jpg

Foundations 

Grounded in first-principles fluid mechanics, chemical reaction kinetics, and certified membrane physics.

​

Many commercial restructuring gadgets claim to break water into "smaller clusters" or "hexagonal structures." In reality, liquid water is a dynamic hydrogen-bonded network that breaks and reforms billions of times per second. Without a continuous physical boundary (like a hydrophilic surface for EZ water), bulk water cannot maintain an altered structural state after passing through a passive device.

​

When looking across the market, commercial "restructuring," "vortexing," or "energised water" device sellers routinely make a specific set of claims.

 

Our 7-stage architecture delivers those target outcomes through verifiable physical mechanics, chemical kinetics, and fluid dynamics instead of unproven structural theories.

SWM.jpg

The Princiles of filtration 

Mass Market "Restructuring" Device Approach
V

Our 7-Stage Process Approach

​

Pathogen & Contaminant Removal
Mass market 

Assumed through "self-cleansing" field properties (unproven) or substandard unconsidered pre treatement as an optional extra 
Our 7-part 

Absolute capture via 3-part pre-treatment and 0.01-micron physical barriers.

Hardness & Scale Reduction
Mass market 

Magnetic/catalytic crystal shape alteration presumptions
Our 7-part

Stage 4 (true chemical ion swapping).

Palatability & Freshness
Mass market 

Passive vortex geometric spin.
Our 7-part

Stages 2,3&6

Hydration Performance
Mass market

Claims of permanent molecular restructuring.
Our 7-part

Organoleptic optimisation driving higher actual volumetric compliance*.
Using Benouli principles of flow dynamics and EBCT filter media.
*Presumed and open for challenge

The Limits of our knowledge 

The persistence of changes associated with fluid dynamics, interfacial phenomena, and gas–liquid saturation depends on the underlying physical processes, including Henry’s law, fluid motion and bulk thermodynamics.

The sections below explain why these effects are transient and how a fresh POU system can make use of them at the point of drinking.
 

How Long Do These Effects Last?
 

1. Principled Oxygenation: Dissolved Gas Stability

  • Oxygenation under pressure. A properly designed air injector introduces microbubbles downstream of the physical media. This can bring dissolved oxygen (DO) toward atmospheric equilibrium or cause slight supersaturation, depending on the pressure in the line. Henry’s law and the gas’s partial pressure govern this equilibrium.

  • Degassing after pouring. Once the water leaves the pressurised system and enters an open container at ambient pressure, excess dissolved oxygen begins to escape.

  • Temperature effects. As the poured water warms to room temperature, its capacity to hold dissolved gas decreases, allowing oxygen to come out of solution.

  • Expected persistence. Microbubbles may remain visibly suspended for a few minutes. Dissolved oxygen then gradually returns towards room-temperature equilibrium over minutes to a few hours.
     

Restructured Water: Hydrodynamic and Molecular Effects

  • Interfacial effects versus bulk behaviour. Ordering phenomena, such as exclusion-zone layers and transient changes in the hydrogen-bond network, occur at fluid interfaces or under active shear. These should be distinguished from bulk liquid behaviour.

  • Rapid molecular relaxation. Thermal fluctuations continually rearrange hydrogen bonds between water molecules, with relaxation occurring on picosecond timescales.

  • Limits during storage. Changes induced by high-velocity shear, magnetic fields or contact with minerals are described here as metastable rather than permanent. Examples include altered surface tension, transient orientation of hydration shells around dissolved cations, and small-scale vortical motion. Once the water is stored without flow in a glass or bottle, thermal molecular motion drives it back towards equilibrium.

    Because structured ordering and micro-aeration degrade over time once exposed to room temperature and static air, water cannot be "permanently structured" or statically bottled without losing these dynamic properties. Treating municipal tap water through sequential physical filtration and terminal Venturi aeration at the exact moment of dispense guarantees that you drink the water at its absolute peak of purity, gas saturation, and sensory freshness.

WhatsApp Image 2026-10-29 at 16.26.26.jpeg

Investment and Installation

Full system fully installed
£1,100

Annual service
£199

 

Existing 4-part Upgrade
£399+£150 (current system service)
Annual service

£199

​

Scope of works 
Cabinet space
Pipe access
Pressure and flow parameters


Image shown
proof of concept 

Screenshot 2026-07-29 225411.png

Pre treatment assurances

We fully protect our process filtration system with a patented Submicron Depth Filter Cartridge at a critical stage

Engineered with advanced electro-adsorptive media technology, this cartridge delivers the rigorous purification efficiency of ultra-membrane filtration but with exceptionally high flow rates and zero wasted water.

By using a natural electropositive charge field instead of a tight mechanical squeeze, it pulls contaminants out of the water like a magnet while maintaining an ultra-low pressure drop.

Key Benefits & Technology

Electropositive Adsorption:
Attracts and traps submicron pathogens, heavy metals, and cellular debris.

PAC & Silver Matrix:
Powdered Activated Carbon (PAC) eliminates tastes and odours, while the silver lining prevents bacterial growth inside the housing.

High Loading Capacity:
Lasts up to 25 times longer than standard mechanical media.

Versatile Performance:
Functions perfectly across a wide 4–9 pH window in fresh, brackish, or salt water.

Lab-Tested Performance Metrics
Viruses (Polio, Rotavirus, Norovirus): >99.99% removal
Bacteria (E. coli, Legionella, Pseudomonas): >99.9999% removal
Cysts (Giardia, Cryptosporidium): >99.95% removal
Heavy Metals (Lead, Arsenic V, Cadmium): >95% reduction
Other Metals (Chromium, Iron, Selenium, Mercury): 60% – 85% reduction
Chemicals & Toxins (Chlorine, VOCs, PCBs, BPA): High reduction
Modern Pollutants (Microplastics, Pharmaceuticals, Hormones): High reduction


(Note: Particle retention capacity is equivalent to a 0.02-micron size for virus removal. Tested at 6.5 pH.)

Certifications & Compliance
NSF/ANSI Standards 42 & 61 Certified Media
IAPMO UPC Certified (Drinking Water System Components)
USP Class VI and Endotoxin Tested

Screenshot 2026-11-12 013202.png
Science based Principles on Air injection 

©2026 Better than bottled.​

07377 942552
thewatermarkuk@gmail.com

bottom of page